FINfloor stocks selected TAL products required for professional glue-down vinyl installations. These include moisture and vapour barriers, primers, self-levelling compounds, LVT adhesive and finishing products.
Use the TAL installation guidelines and materials calculator to help plan your project and estimate the products required.
BROWSE TAL CALCULATORS →Proper preparation helps to:
We have a list of recommended installers that can successfully install glue down flooring.
A low-emission, water-dispersion primer for porous gypsum and anhydrite substrates.
Dilute 1:1 to 1:3 to bind dust and regulate absorption. Substrates must be dry, with moisture below 0.5%.
Please Note: Consult the latest technical data sheet before use.
A low-emission, ready-to-use adhesion promoter for smooth, low-absorbency floors and walls.
Suitable for interior and exterior use before applying skimming compounds, cementitious adhesives or renders.
Please Note: Consult the latest technical data sheet before use.
A ready-to-use, synthetic resin bonding promoter with silica aggregates and very low VOC emissions.
Suitable for interior floors and walls before applying decorative cementitious skimming mortars.
Please Note: Consult the latest technical data sheet before use.
A three-component, epoxy-cementitious primer.
Used for waterproofing damp, non-absorbent substrates.
Please Note: Consult the latest technical data sheet before use.
A multi-purpose adhesive for installing vinyl, textile and linoleum coverings.
Mostly commonly used on interior floors and walls.
Please Note: Consult the latest technical data sheet before use.
A two-component, epoxy-polyurethane adhesive for installing resilient and textile floor coverings.
Please Note: Consult the latest technical data sheet before use.
A fibre-reinforced adhesive developed for installing LVT, SPC and rigid LVT flooring.
Delivering strong adhesion and dimensional stability.
Please Note: Consult the latest technical data sheet before use.
Anti-slide tackifier with high residual tack for textile loose-lay tiles.
Jointing strip for fixing synthetic grass sheets in place and marking out lines for various sporting disciplines.
One-component, solvent-free, silylated polymer adhesive with very low emission level of volatile organic compounds, for all types of parquet.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: beige.
Open time: 50-60 minutes.
Set to light foot traffic: after 12 hours.
Sanding: after 3 days.
EMICODE: EC1 R Plus – very low emission.
Storage: 12 months.
Application: N° 2 or 4 notched trowel for wood.
Consumption: 800-1200 g/m².
Packaging: 15 kg drums and 600 ml soft-cartridges.
Fibre-reinforced LVT adhesive. Specifically developed for the installation of LVT SPC and rigid LVT, it guarantees the highest performances in terms of adhesion and dimensional stability.
Use Ultrabond Eco 4 LVT for bonding: · rigid LVT and SPC; · LVT oors, tiles and planks. Suitable also for bonding: · homogeneous, heterogeneous, CV and multilayer PVC oor tiles; · semi-exible quartz vinyl oor tiles (VCT); · synthetic back linoleum tiles; · polyolen-based and PUR oor coverings in tiles; · multilayer cork planks tiles with PVC backing.
TAL VaporStop HB is a high-performance moisture-tolerant two-component epoxy moisture and vapour barrier system.
Once cured, it produces a high cross-link density barrier coat that prevents the passage of water vapour and moisture through concrete slabs, and subsequent debonding of floor coverings.
Ideal for substrates with moisture levels ≤6%.
TAL Vapourscreen WB is a moisture-tolerant two-component water-based epoxy moisture and vapour barrier system.
Designed to reduce the risk of debonding of floor coverings due to high levels of moisture or vapour emissions (MVER).
Ideal for substrates with moisture levels ≤4%.
TAL Floor Primer is a modified latex liquid primer with excellent wetting-out agents, designed for use on porous surfaces.
It creates a good bond onto the substrate for the follow-on layer.
TAL Primer Aggregate (SQ2) is a well-graded silica sand designed to provide a mechanical key for resin flooring systems as well as cementitious screeds / toppings / underlayments.
Broadcast into the wet TAL VaporStop HB to create a mechanical key for the follow-on layer.
TAL Primercoat ready-mix one-component (1k) slurry priming coat provides a mechanical key for TAL Screedmaster when applied over the cured TAL Vapourscreen WB and TAL VaporStop HB moisture and vapour barrier system.
Also suitable for application over existing resin-based flooring systems, after correct preparation of the resin-based flooring
TAL Screedmaster is a commercial grade self-levelling and smoothing underlayment compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates, and specially formulated to achieve the smooth and flat surface required for the installation of resilient floor coverings in high traffic, commercial installations.
Designed application thickness: 3-16mm in a single layer.
TAL Superscreed SL is a residential grade self-levelling and smoothing underlayment compound manufactured from rapid-setting shrinkage-compensated cement and selected aggregates, and specially formulated to achieve the smooth and flat surface required for the installation of resilient floor coverings in residential installations.
Can also be used in light commercial installations.
Designed application thickness:1-12mm in a single layer.
TAL Profix Plus LVT is a solvent-free, high-strength modified acrylic adhesive specially formulated for use with LVTs (Luxury Vinyl Tiles) and PVC-backed vinyl tiles.
TAL Profix Plus LVT is designed for ‘wet’ lay installations, and the final glue line once set/cured is rigid, inhibiting lateral shear movement on the tiles once in service, thus reducing the possibility of ‘gapping’ between the tiles over time.
TAL Goldstar Sealmaster 1000 is a single component permanently flexible moisture curing polyurethane based joint sealant and adhesive.
Fast curing and is resistant to shock, vibration and temperature change when cured.
"*" indicates required fields
