Galaxy II Glue-Down Vinyl Flooring
Galaxy II glue-down vinyl flooring from FINfloor pairs long, wood-look planks with a Class 33 rating for busy homes and general commercial interiors. The 1526 mm planks draw the eye through adjoining spaces, while painted bevels give each board definition.
Compare six finishes, see Galaxy II in furnished interiors and find the resources you need to specify, install and care for the floor.
Designing with Galaxy II
Start with the longest sightline. In an open-plan home, running the boards in one direction can connect the kitchen and living areas. In an office or showroom, look at where the planks meet thresholds, reception counters and other flooring finishes before settling on the layout.
Galaxy II at a glance
- Plank size
- 1,526 × 230 × 2.5 mm
- Wear layer
- 0.5 mm with double SUPER UV protective coating
- Surface
- Antique Crystal Wood or embossed-in-register (EIR) texture, depending on the finish, with painted bevels
- Installation
- Full-spread glue-down
- Use rating
- Class 33. Suitable for heavy domestic and general commercial interiors.
- Warranty
- Lifetime heavy domestic structural and 10-year general commercial, subject to warranty terms
What does a 0.5 mm wear layer do?
The wear layer protects the printed wood design from everyday surface wear. When specifying a floor, also consider the use rating, expected traffic, rolling loads and the conditions on site.
Explore six Galaxy II finishes
Select a swatch to explore the product, or open the styling idea beneath it.
Altair
Styling idea
Try ivory walls, oat linen and dark bronze detailing. The embossed-in-register texture follows the printed wood grain.
Bode
Styling idea
Pair Bode’s embossed-in-register wood texture with limestone tones, woven upholstery and matte-black accents.
Malin
Styling idea
Compare Malin with muted olive joinery, warm white walls and woven textiles.
Sauron
Styling idea
Try Sauron alongside warm white walls, textured linen and aged brass.
Zephyra
Styling idea
Sample Zephyra alongside soft greige, off-white walls and tactile fabrics.
Specifying Galaxy II glue-down vinyl flooring
For architects and interior designers, record the finish, approved sample and intended use in the finishes schedule. Show plank direction and thresholds on the floor plan. Ask the flooring contractor to confirm subfloor moisture, preparation and a compatible full-spread adhesive system so the quote covers the complete installation.
Technical resources
Can Galaxy II go over existing tiles?
Yes, where the tiles are sound, firmly bonded and free of cracks. A flooring contractor should assess the substrate and use a compatible preparation system to smooth grout lines and ridges that could show through the vinyl.
What should the installer confirm before work starts?
Confirm subfloor condition and moisture, surface preparation, adhesive compatibility, expected foot traffic and rolling loads, direct sunlight and threshold details. Include the installation and maintenance guides in the handover pack.
Cleaning and everyday care
Sweep first, then damp mop
Remove grit with a soft broom or a vacuum with the rotating brush switched off. Use a lightly damp microfibre mop and a suitable pH-neutral vinyl cleaner, diluted as directed.
Wipe up spills promptly
Galaxy II planks resist clean water on the surface. Wipe up spills and dry the area promptly to protect the adhesive bond and subfloor from standing water.
Protect entrances and high-traffic areas
Use vinyl-safe entrance mats and felt pads under furniture. Lift heavy items when moving them. Use blinds or curtains where strong direct sunlight falls across the floor.
Let the adhesive cure before cleaning
Wait until the adhesive has fully cured before wet cleaning or moving heavy furniture onto the floor. FINfloor gives 48 hours as a typical curing period. Follow your installer’s instructions and the adhesive manufacturer’s specified cure time.
Get a quote for your Galaxy II project
Galaxy II pricing
The collection is listed at a recommended selling price of R341 per m², including VAT. At that rate, the planks for a 20 m² room come to R6,820 before allowing for cuts and rounding up to full boxes.
Contact a FINfloor-approved dealer for a quote. Share your preferred finish, room measurements and details of your existing floor. Ask the dealer to confirm availability and itemise floor preparation, adhesive, trims, installation and any applicable delivery charges.
