Aurora II Straight-Plank Vinyl Flooring
Aurora II straight-plank vinyl flooring is a wood-look, glue-down luxury vinyl tile (LVT) from FINfloor, designed for busy homes and light commercial interiors. Its long planks carry a continuous line from the entrance into adjoining rooms, while the textured finish and fine bevels give each board definition.
Explore six finishes, see how they pair with paint, stone and joinery, and find the pricing, installation guidance and care tips you need to plan your floor.
Designing with straight planks
Start with the view from the main doorway. In an open-plan interior, a consistent plank direction can connect the kitchen, dining and living areas. Check how the layout reads at thresholds and in adjoining passages.
Aurora II at a glance
- Plank size
- 1220 × 228.6 × 2 mm
- Wear layer
- 0.3 mm with double SUPER UV protective coating
- Surface
- Antique Crystal Wood texture with four-sided micro-bevels
- Installation
- Full-spread glue-down
- Use rating
- Class 23 heavy domestic and Class 31 light commercial
- Warranty
- 20 years heavy domestic and 5 years light commercial, subject to warranty terms
How should I choose the plank direction?
Look along the longest sightline and check the view from adjoining doorways. Ask your installer to confirm plank direction, transitions and visible cuts before you order.

Explore six Aurora II finishes
Select a swatch to visit the product page, or open the styling idea beneath it.
Specifying Aurora II straight-plank vinyl flooring
For architects and interior designers, record the finish, approved sample and intended use in the finishes schedule. Show plank direction and thresholds on the floor plan. Ask the flooring contractor to confirm subfloor moisture, preparation and a compatible adhesive system so the quote covers the complete installation.
Technical resources
Can Aurora II go over existing tiles?
Yes, in some renovations. The tiles must be sound, firmly bonded and free of cracks. A flooring contractor should assess the substrate and use a compatible preparation system to smooth grout lines and ridges that could show through the vinyl.
What should the installer confirm before work starts?
Confirm the substrate condition and moisture, the smoothing and adhesive system, expected traffic and rolling loads, exposure to direct sunlight, and threshold details. Include the installation and maintenance guides in the handover pack.
Cleaning and everyday care
Sweep first, then damp mop
Remove grit with a soft broom or a vacuum with the rotating brush switched off. When the floor needs mopping, use a lightly damp microfibre mop and a suitable pH-neutral vinyl cleaner, diluted as directed.
Wipe up spills promptly
Aurora II planks resist clean water on the surface. Wipe up spills and dry the area promptly to protect the adhesive bond and subfloor from standing water.
Protect entrances and areas under furniture
Use vinyl-safe entrance mats and felt pads under furniture. Lift heavy items when moving them. Use blinds or curtains where strong direct sunlight falls across the floor.
Let the adhesive cure before cleaning
Wait until the adhesive has fully cured before wet cleaning or moving heavy furniture onto the floor. FINfloor gives 48 hours as a typical curing period. Follow your installer’s instructions and the adhesive manufacturer’s specified cure time.
Get a quote for your Aurora II project
Straight-plank pricing
The six featured finishes have a recommended selling price of R272 per m², including VAT. At that rate, the planks for a 20 m² room come to R5,440 before allowing for cuts and rounding up to full boxes.
Contact a FINfloor-approved dealer for a quote. Share your preferred finish, room measurements and details of your existing floor. Ask the dealer to confirm availability and itemise floor preparation, adhesive, trims, installation and any applicable delivery charges.
